|
Grizzly G0538 1/3 HP Oscillating Spindle Sander
|
MSRP: $149.95
Your Price: $139.95
Savings: $ 10.00 ( 7% )
Shipping: N/A
Manufacturer: Grizzly
Prices subject to change. Please verify price during checkout.
|
|
Grizzly G0538 1/3 HP Oscillating Spindle Sander Features
|
1/3 HP, 110V 4 Amp, 60Hz, 1725 RPM spindle speed
2 1/2" Dust Port
Extra large 20" x 14" table
Includes spindle changing wrenches and table inserts
Spindle oscillates at 72 strokes per minute, 5/8" oscillating range
|
|
|
|
|
|
|
|
|
Additional Grizzly G0538 1/3 HP Oscillating Spindle Sander Information
|
Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited, you'll really appreciate this bench top version. With its large table surface and six different sanding drum diameters stowed neatly under the table, the right sanding drum is a quick change away for perfect results. Includes spindle changing wrenches, table inserts and 2 1/2" dust port. 1/3 HP.1/3hp, 110V, 4amp, 60HZ1725RPMToggle on/off safety switch with locking tabExtra large 20" x 14" TableSpindle oscillates at 72 strokes per minuteComes with six 4 1/2" tall sanding drums, three 80 grit sleeves (1/2", 1" and 2") three 150 grit sleeves (3/4", 1 1/2",and 3") and 6 table inserts.Approximate shipping weight 34lbs.
|
|
|
What Customers Say About Grizzly G0538 1/3 HP Oscillating Spindle Sander:
|
|
Like the size of the platform that surrounds the spindle. Good performance. Would highly recommend this product. Very easy to use. Can quickly and easily change spindles and sandpaper on the spindle.
Barbara This is just what we want. Works great, Fast shipping, Thank you so much.
I haven't had a chance to use the product much at this time, but what I have used it, it works great.
Let the tool do the work, and the results are pleasing. The unit works fine as long as you don't force-feed your stock into the spindle. While certainly not a workhorse spindle sander, the Grizzly G0538 delivers a smooth, reliable job. Changing spindles is quick and made handier with the spare spindle holders built into the base.
The only problem is the amount of noise generated by attaching a shop vac to the vacuum port; the limited air flow causes quite a bit of noise. I have a Delta sander in my shop, but needed a portable one for another location. This model was decently priced and so far has worked as well as the Delta.
|
|
 |
|
|
